801-A Organic Bentonite Rheological Additive for Reliable Rheology Control

A stable formulation requires effective control of viscosity, dispersion, and application behavior. 801-A organic bentonite rheological additive provides reliable thickening and rheology control for low- to medium-polarity solvent systems used in paints, inks, sealants, and other industrial formulations.

801-A is an organic ammonium montmorillonite organoclay developed for efficient dispersion under grinding and high-shear conditions. In addition, it maintains good dispersibility across a wide temperature range, helping formulators achieve more consistent processing performance.

Reliable Thickening and Rheology Performance

801-A helps formulators control the rheological behavior of solvent-based systems.

Its organoclay structure provides effective thickening in low- and medium-polarity solvents. Therefore, manufacturers can use it when developing formulations that require better viscosity control and stable processing behavior.

Moreover, 801-A can disperse directly during the raw-material grinding process. Manufacturers can also add it after preparing a traditional pre-gel, depending on their production process.

Typical Technical Properties

PropertySpecification
CompositionMontmorillonite organic ammonium derivative
AppearanceLight yellow fine powder
Moisture Content≤3.50%
Dry Powder Fineness≥98% through 200 mesh
Loss on Ignition at 900°C29.0–31.0%

These specifications provide formulators with a technical reference when evaluating the product for different solvent-based coating and sealant systems.

Applications in Paints, Inks and Sealants

The organic bentonite rheological additive can support several industrial applications, including:

  • Industrial inks
  • Asphalt paints
  • Anti-corrosion paints
  • Marine paints
  • Sealants

These applications often require controlled viscosity and stable dispersion during production and application.

Meanwhile, Qinghong’s website also positions 801-A within its solvent-based rheological additive range for industrial coating and ink applications.

Recommended Use in Paint Formulations

For paint production, the TDS recommends the following process:

First, add part of the resin and solvent.

Next, add 801-A and mix for 5–10 minutes under high shear.

Then, add a polar activator equal to approximately 30–50% of the organic bentonite amount. The TDS gives 95% ethanol and propylene carbonate as examples.

After another 5–10 minutes of high-shear mixing, grind or stir the system until the required particle condition is achieved. Finally, add the remaining resin, solvent, and other materials to complete the formulation.

Use in Sealant Formulations

801-A can also support sealant production.

In this process, manufacturers first dissolve the elastomer polymer in the solvent. Then, they add the remaining raw materials and allow them to wet properly.

Afterward, add the polar activator and disperse 801-A completely in the solvent system.

The optimum dosage depends on the formulation and required rheological performance. However, the TDS states that the average dosage in sealants is approximately 3–5%, which is generally slightly higher than the dosage used in paints.

Why Choose 801-A Organic Bentonite?

801-A combines several practical advantages for industrial formulators:

  • Reliable thickening
  • Good rheology control
  • Wide-temperature dispersibility
  • Direct grinding-process addition
  • Compatibility with low- to medium-polarity solvent systems
  • Applications across paints, inks and sealants

Zhejiang Qinghong New Material Co., Ltd. has specialized in organic bentonite manufacturing since 1980 and supplies multiple solvent-based and water-based rheological additive series for industrial markets.

For manufacturers looking for an organic bentonite rheological additive for coating, ink, marine paint, or sealant formulations, 801-A provides a practical option for evaluating rheology and thickening performance.

Contact Qinghong with your solvent system, application, processing method, and target viscosity to evaluate the appropriate usage conditions for your formulation.